41 research outputs found
Secondary Beam Monitors for the NuMI Facility at FNAL
The Neutrinos at the Main Injector (NuMI) facility is a conventional neutrino
beam which produces muon neutrinos by focusing a beam of mesons into a long
evacuated decay volume. We have built four arrays of ionization chambers to
monitor the position and intensity of the hadron and muon beams associated with
neutrino production at locations downstream of the decay volume. This article
describes the chambers' construction, calibration, and commissioning in the
beam.Comment: Accepted for publication in Nucl. Instr. Meth.
Ion Chambers for Monitoring the NuMI Neutrino Beam at FNAL
The Neutrinos at the Main Injector (NuMI) beamline will deliver an intense
muon neutrino beam by focusing a beam of mesons into a long evacuated decay
volume. The beam must be steered with 1 mRad angular accuracy toward the Soudan
Underground Laboratory in northern Minnesota. We have built 4 arrays of
ionization chambers to monitor the neutrino beam direction and quality. The
arrays are located at 4 stations downstream of the decay volume, and measure
the remnant hadron beam and tertiary muons produced along with neutrinos in
meson decays. We review how the monitors will be used to make beam quality
measurements, and as well we review chamber construction details, radiation
damage testing, calibration, and test beam results.Comment: paper to appear in the proceedings of the 11th Beam Instrumentation
Workshop, Oak Ridge, T
Scintillator counters with WLS fiber/MPPC readout for the side muon range detector (SMRD)of the T2K experiment
The T2K neutrino experiment at J-PARC uses a set of near detectors to measure
the properties of an unoscillated neutrino beam and neutrino interaction
cross-sections. One of the sub-detectors of the near-detector complex, the side
muon range detector (SMRD), is described in the paper. The detector is designed
to help measure the neutrino energy spectrum, to identify background and to
calibrate the other detectors. The active elements of the SMRD consist of 0.7
cm thick extruded scintillator slabs inserted into air gaps of the UA1 magnet
yokes. The readout of each scintillator slab is provided through a single WLS
fiber embedded into a serpentine shaped groove. Two Hamamatsu multi-pixel
avalanche photodiodes (MPPC's) are coupled to both ends of the WLS fiber. This
design allows us to achieve a high MIP detection efficiency of greater than
99%. A light yield of 25-50 p.e./MIP, a time resolution of about 1 ns and a
spatial resolution along the slab better than 10 cm were obtained for the SMRD
counters.Comment: 7 pages, 4 figures; talk at TIPP09, March 12-17, Tsukuba, Japan; to
be published in the conference proceeding
The T2K Side Muon Range Detector
The T2K experiment is a long baseline neutrino oscillation experiment aiming
to observe the appearance of {\nu} e in a {\nu}{\mu} beam. The {\nu}{\mu} beam
is produced at the Japan Proton Accelerator Research Complex (J-PARC), observed
with the 295 km distant Super- Kamiokande Detector and monitored by a suite of
near detectors at 280m from the proton target. The near detectors include a
magnetized off-axis detector (ND280) which measures the un-oscillated neutrino
flux and neutrino cross sections. The present paper describes the outermost
component of ND280 which is a side muon range detector (SMRD) composed of
scintillation counters with embedded wavelength shifting fibers and Multi-Pixel
Photon Counter read-out. The components, performance and response of the SMRD
are presented.Comment: 13 pages, 19 figures v2: fixed several typos; fixed reference
Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter
Showers produced by positive hadrons in the highly granular CALICE
scintillator-steel analogue hadron calorimeter were studied. The experimental
data were collected at CERN and FNAL for single particles with initial momenta
from 10 to 80 GeV/c. The calorimeter response and resolution and spatial
characteristics of shower development for proton- and pion-induced showers for
test beam data and simulations using Geant4 version 9.6 are compared.Comment: 26 pages, 16 figures, JINST style, changes in the author list, typos
corrected, new section added, figures regrouped. Accepted for publication in
JINS
Design, Construction and Testing of the Digital Hadron Calorimeter (DHCAL) Electronics
A novel hadron calorimeter is being developed for future lepton colliding
beam detectors. The calorimeter is optimized for the application of Particle
Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very
finely segmented readout with 1 x 1 cm2 cells. The active media of the
calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit,
readout. To first order the energy of incident particles in this calorimeter is
reconstructed as being proportional to the number of pads with a signal over a
given threshold. A large-scale prototype calorimeter with approximately 500,000
readout channels has been built and underwent extensive testing in the Fermilab
and CERN test beams. This paper reports on the design, construction, and
commissioning of the electronic readout system of this prototype calorimeter.
The system is based on the DCAL front-end chip and a VME-based back-end
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
A first prototype of a scintillator strip-based electromagnetic calorimeter
was built, consisting of 26 layers of tungsten absorber plates interleaved with
planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a
positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's
performance is presented in terms of the linearity and resolution of the energy
measurement. These results represent an important milestone in the development
of highly granular calorimeters using scintillator strip technology. This
technology is being developed for a future linear collider experiment, aiming
at the precise measurement of jet energies using particle flow techniques
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
The spatial development of hadronic showers in the CALICE scintillator-steel
analogue hadron calorimeter is studied using test beam data collected at CERN
and FNAL for single positive pions and protons with initial momenta in the
range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron
showers are parametrised with two-component functions. The parametrisation is
fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics
lists from Geant4 version 9.6. The parameters extracted from data and simulated
samples are compared for the two types of hadrons. The response to pions and
the ratio of the non-electromagnetic to the electromagnetic calorimeter
response, h/e, are estimated using the extrapolation and decomposition of the
longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to
JINS
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
The intrinsic time structure of hadronic showers influences the timing
capability and the required integration time of hadronic calorimeters in
particle physics experiments, and depends on the active medium and on the
absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15
small plastic scintillator tiles read out with Silicon Photomultipliers, the
time structure of showers is measured on a statistical basis with high spatial
and temporal resolution in sampling calorimeters with tungsten and steel
absorbers. The results are compared to GEANT4 (version 9.4 patch 03)
simulations with different hadronic physics models. These comparisons
demonstrate the importance of using high precision treatment of low-energy
neutrons for tungsten absorbers, while an overall good agreement between data
and simulations for all considered models is observed for steel.Comment: 24 pages including author list, 9 figures, published in JINS